Manufacturing Technology 2023, 23(5):685-690 | DOI: 10.21062/mft.2023.073

Kinematic Parameters of the Biplanetary Mechanism (Intermittent Mixing Machines)

Erkin Nematov ORCID...1, Amon Berdiev ORCID...2, Peng Wang ORCID...3
1 Faculty of Mechanichal engineering, Tashkent State Technical University named after Islam Karimov, University Str.2, 100174, Tashkent, Uzbekistan
2 Faculty of technology of foodstuff products, Tashkent institute of chemical technology, Navoiy Str.32, 100011, Tashkent, Uzbekistan
3 School of Information Science and Electrical Engineering, Shandong Jiao Tong University, 5001 Haitang Road, Changqing District, Jinan, Shandong Province, China

The subject of research is the kinematic parameters of a biplanetary mechanism of the intermitted mixing machines. The article substantiates analytical expressions for determining the kinematic parameters of the drives of the working body of the intermitted mixing machines with planetary ones with double satellites and biplanetary mechanisms; the laws of change of displacements, velocities and accelerations of the points of the working body for drives with planetary one with double satellites and biplanetary mechanisms are determined; the regularities of the influence of the velocity parameters of the driving links on the kinematic characteristics of these mechanisms are established.

Keywords: Drive, Biplanetary mechanism, Kinematic parameters, biplanetary mechanism, mixing machine.

Received: March 8, 2023; Revised: August 28, 2023; Accepted: September 12, 2023; Prepublished online: September 26, 2023; Published: December 6, 2023  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Nematov E, Berdiev A, Wang P. Kinematic Parameters of the Biplanetary Mechanism (Intermittent Mixing Machines). Manufacturing Technology. 2023;23(5):685-690. doi: 10.21062/mft.2023.073.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. CHEN, F.Y. (1977). A survey of the state of the art of cam system dynamics. In: Mechanism and Machine Theory. Vol. 12, No. 3, pp. 201-224. ISSN 0094-114X. Go to original source...
    2. YANG, Y., J. WANG, S. ZHOU, et al. (2019). Design of a novel coaxial eccentric indexing cam mechanism. In: Mechanism and Machine Theory. Vol. 132, pp. 1-12. Go to original source...
    3. KARIMOV, K., KARIMOV, R., AKHMEDOV, A. (2016). Development of the theoretical foundations of mechanisms with controlled parameters and constraints. Monograph, p. 326. Tashkent State Technical University, Tashkent.
    4. KARIMOV, K., UMURZAKOV, A. (2015). Theory and design of friction mechanisms with controlled friction. Monograph, p. 147. Tashkent State Technical University, Tashkent.
    5. KARIMOV, K., NAGAEV R., USMANKHODJAEV, H. (1984). Analysis and synthesis of the planetary frictional mechanisms with unround wheels. In: Proceedings of the Sixth World Congress on the Theory of Machines and Mechanism, Vol. 1, p. 230-232. New Delhi, India.
    6. KARIMOV, K., ABDUVALIEV, U., AKHMEDOV, A. (2015). Development and analytical realization of the mathematical model of controlled motion of a positioning mechanism. Part 1. In: European Applied Sciences. Vol 3, pp. 61-63. Stuttgart, Germany. ISSN 2195 - 2183.
    7. NEMATOV, E., KHUDJAEV, M., KHASANOV, B. (2021). Development of a mathematical model of dynamic characteristics of a drive with a planetary mechanism. In: E3S Web of Conferences. Vol. 258, pp. 1-8. ISSN 22671242. Go to original source...
    8. MINÁRIK, M. BODNÁR, F. (2019). Dynamic Analysis of the Crank Mechanism through the Numerical Solution. In: Manufacturing Technology. Vol. 19, No. 6, pp. 1003-1009. ISSN 12132489. Go to original source...
    9. SEGLA, S. (2018). Kinematic analysis and optimization of a wheel loader mechanism. In: Manufacturing Technology. Vol. 18, No. 2, pp. 309-314. ISSN 12132489. Go to original source...
    10. VAVRO, J., J. VAVRO, P. KOVÁÈIKOVÁ, et al. (2017). Kinematic and Dynamic Analysis and Distribution of Stress in Items of Planar Mechanisms by Means of the MSC ADAMS Software. In: Manufacturing Technology. Vol. 17, No. 3, p. 31. ISSN 12132489. Go to original source...
    11. ARTOBOLEVSKY, I. (1988). Theory of mechanisms and machines. Moscow: Nauka.

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content