Manufacturing Technology 2024, 24(3):355-364 | DOI: 10.21062/mft.2024.002
Application of 35NCD 16 Steel Under Cyclic Loading by an Elastoplastic Model
- 1 Research Unit: Materials. Processes and Environment (UR/MPE). Faculty of technology. University M’hamed Bougara 35000 Boumerdes. Algeria
- 2 Center for scientific and technical research in Physico-chemical analysis (CRAPC) BP 384 Bouismail. Tipaza. Algeria
- 3 Research Laboratory in Food Technology. Faculty of technology. University M’hamed Bougara of Boumerdes
The purpose of this paper is to study an application of the 35NCD 16 steel by a model generalizing the isotropic and kinematic strain hardening laws. The model in question is represented by a field of strain hardening moduli corresponding to the introduction of the configuration of the flow surfaces. Each flow surface is characterized by its constant elastoplastic modulus, its normal unit vector, its radius and its center coordinates. For cases of uniaxial or multiaxial (complex) loading, in particular for cases of cyclic loading or unloading, the instantaneous configuration can be determined by the position and dimensions of the flow surfaces, determining the strain increment for each strain incre-ment.
Keywords: Cyclic plasticity, Three-dimensional elastoplasticity, Incremental elastoplasticity, Plastic flow surface
Received: July 31, 2023; Revised: November 17, 2023; Accepted: January 2, 2024; Prepublished online: May 7, 2024; Published: July 1, 2024 Show citation
References
- LUONG, M. P. (1980). Phénomènes cycliques dans les sols pulvérulents. In : Revue Française de géotechnique, Vol, 10. No. 2, pp. 39 - 53. ISSN 0181- 0529
Go to original source...
- KLINSKI, M. (1988). A cyclic plasticity model based on fuzzy set theory. In: Journal of engineering Mechanics ASCE, Vol. 114. No 4, pp. 563 - 582. ISSN 0733 - 9399
Go to original source...
- CHABOCHE, J. L. (1989). Constitution equation for cyclic plasticity and cyclic viscoplasticity. In: International Journal of Plasticity, Vol. 51. No 3, pp. 247- 302. ISSN 1879 -2154
Go to original source...
- ACHIALLEAS, G. P., GEORGE, D. B. (2002). Plasticity model for under sand small and large cyclic strain: multiaxial formulation. In: Soil Dynamics and Earthquake Engineering, Vol. 22, pp. 191 - 204. ISSN 1879-341X
Go to original source...
- VERONIQUE A. (2001). Plasticité cyclique d'un acier inoxydable austéno-ferritique sous chargement biaxial non-proportionnel. Matériaux. Université des Sciences et Technologie de Lille - Lille I; Ecole Centrale de Lille. Français. NNT. Tel-00005814v2.
- THOMAS, B. S., JEONG, W. Y. (2018). Kinematic hardening model considering directional hardening response. In: International Journal of Plasticity, Vol. 110, pp. 145 - 165. ISSN 1879 -2154
Go to original source...
- KNUT, M., MAGNUS, E., JOHAN, A. (2018). Modelling of kinematic hardening at large biaxial deformations in pearlitic rail steel. In: International Journal of Plasticity, Vol. 130-131, pp. 122 -132. ISSN 1879 -2154
Go to original source...
- DAFALIAS, Y. F., POPOV, E. P. (1975). A model of non-linearly hardening materials for complex loading. In: Acta Mechanica, Vol. 21, pp. 173 -192. ISSN 1619 - 6937
Go to original source...
- KRIEG, R. D. (1975). A practical two surface plasticity theory. In: Journal of Applied Mechanics, Vol. 42. No. 3, pp. 641- 646. ISSN 0021- 8936
Go to original source...
- YOSHIDA, F., UEMORI, T. (2022). A model of large-strain cyclic plasticity describing the Bauschinger effect and work hardening stagnation. In: International Journal of Plasticity, Vol. 18, pp. 661- 686. ISSN 1879 -2154
Go to original source...
- MONTANS, F. J., CAMINERO, M. A. (2007). On the consistency of nested surfaces, models and their kinematic hardening rules. In: International Journal of Solids and Structures, Vol. 44, pp. 5027-5042. ISSN 1879- 2146
Go to original source...
- BROKATE, M., DRESSLER, K, KREJCI, P. (1996). On the Mróz model. In: European Journal of Applied Mathematics, Vol. 7. No. 5, pp. 473 - 497. ISSN 1469- 4425
Go to original source...
- BROKATE, M., KREJCI, P., RACHINSKII, D. (1998). Some analytical properties of the multidimensional continuous Mróz model of plasticity. In: Control and Cybernetics, Vol. 27. No. 2, pp. 199-215. ISSN 2720- 4278
- JIANG, Y., SEHITOGLU, H. (1996). Comments on the Mróz multiple surface type plasticity models. In: International Journal of Solids and Structures, Vol. 33. No. 7, pp. 1053 -1068. ISSN 1879-2146
Go to original source...
- GARUD, Y. S. (1981). A New Approach to the Evaluation of Fatigue under Multiaxial Loadings. In: Journal of Engineering Materials and Technology, Vol. 103. No. 2, pp. 118 -125. ISSN 0094 - 4289
Go to original source...
- IWAN, W. D. (1967). On a class of models for yieldin behavior of continuo and composite system. In: Journal of Applied Mechanics, Vol. 67. Trans ASME. Serie E. No.9, pp. 612-617. ISSN 0021- 8936
Go to original source...
- MROZ, Z. (1967). On the description of anisotropic work hardening. In: J Mech.Phys. Solids,Vol. 15, pp. 163-175. ISSN: 1873 - 4782
Go to original source...
- SEYED, B. B, YANNIS, F. D. (2022). Modeling Fundamentals and Applications. In: Elsevier Series on Plasticity of Materials, pp. 101-138. ISBN 9780128192931
- MEIJUAN, Z., et al. (2022). Cyclic Plasticity of Metals Modeling Fundamentals and Applications. In: Else-vier Series on Plasticity of Materials, pp. 55-100. ISBN 9780128192931
- NOBUTADA, O., et al. (2021). Modeling of cyclic hardening and evaluation of plastic strain range in the presence of pre-loading and ratcheting. In: International Journal of Plasticity, Vol. 145, pp. 103-174. ISSN 1879 -2154
Go to original source...
- JISHENG, Q., BJØRN, H., ODD, S. H. (2018). A combined isotropic. Kinematic and distortional hardening model for aluminum and steels under complex strain-path changes. In: International Journal of Plasticity, Vol. 101pp. 156-169. ISSN 1879 -2154
Go to original source...
- ABDELMALEK, K., et al. (2021). Mathematical modeling and numerical simulation of the buckling stability behavior of hybrid beam. In: Manufacturing technology engineering science and research journal, Vol. 21. No. 6, pp. 793-804. ISSN 1213-2489
Go to original source...
- WANG, J. L., EVKOVITCH, V., SVENDSEN, B. (2006). Modeling and simulation of directional hardening in metals during non-proportional loading. In: J. Mater. Process. Technol, Vol. 177, pp. 430-432. ISSN 1873-4774
Go to original source...
- PETR, B., et al. (2023). Possibilities of Restoring the Plasticity of Operationally Degraded Steel EN ISO 14MoV6-3. In : Manufacturing technology engineering science and research journal, Vol. 23. No. 5, ISSN 1213-2489 (online)
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.