Manufacturing Technology 2024, 24(6):952-959 | DOI: 10.21062/mft.2024.091
Reconstruction of 3D Models of Fishing Boat Propellers Using Photogrammetry and Reverse Engineering Techniques
- 1 Faculty of Mechanical Engineering, Nha Trang University. 02 Nguyen Dinh Chieu, Nha Trang, Vietnam
- 2 Faculty of Mechanical Engineering, University of Jan Evangelista in Ústí nad Labem. Pasteurova 3334/7, 400 01 Usti nad Labem, Czech Republic
The conventional method for measuring propeller geometric parameters involves utilizing specialized equipment or 3D measuring devices. Currently, specific propeller geometry parameters can be as-sessed by employing virtual measurements performed on a virtual propeller model generated using reverse engineering methods. This paper introduces a novel approach to constructing 3D models of small fishing boat propellers using photogrammetry and reverse engineering techniques. In this method, the propeller is captured through photographs taken with a smartphone camera employing special techniques. Subsequently, these images are processed using Agisoft Metashape to generate a mesh model, from which a precise photogrammetric model of the propeller is developed using CATIA. By comparing the photogrammetric model with the scanned model in GOM Inspect, and evaluating the measurement outcomes of blade radius and pitch on virtual and physical models, it is possible to ascertain that the photogrammetric model exhibits exceptional accuracy. Consequently, the photogrammetric model can be effectively utilized for the measurement of propeller geometric parameters.
Keywords: Photogrammetry, Reverse Engineering, Smartphone, Fishing boat, Propeller
Grants and funding:
The work of this paper is supported by Nha Trang University under project No. TR2023-13-11
Received: June 25, 2024; Revised: August 27, 2024; Accepted: November 20, 2024; Prepublished online: December 2, 2024; Published: December 21, 2024 Show citation
References
- YEO, K.B., CHOONG, W.H. (2014). Marine propeller geometry characterization. In: Journal of Applied Sciences, Vol. 14, No. 23, pp. 3288-3293. Asian Network for Scientific Information, Pakistan. ISSN 1812-5654
Go to original source...
- LEE, S.F., LOVENITTI, P., LAM, M.K., MASOOD, S.H. (2002). A cost-effective thickness measurement technique for engine propellers. In: International Journal of Advanced Manufacturing Technology, Vol. 20, No. 3, pp. 180-189. Springer-Verlag London. ISSN 1433-3015
Go to original source...
- INTERNATIONAL STANDARDS ORGANIZATION (2015). ISO 484-2:2015 Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 2: Propellers of diameter between 0.80 and 2.50 m inclusive.
- JAASTAD, E.B., MUNTHE-KAAS, N.H., EGELAND, O. (2018). Robotic autoscanning of highly skewed ship propeller blades. In: IFAC-PapersOnLine, Vol. 51, No. 22, pp. 435-440. IFAC Secretariat. ISSN: 2405-8963
Go to original source...
- GREWE, O., WANNER, M.C. (2012). Automatic surface capturing of CFK propellers, In: Proceedings of the 8th International Conference on High Performance Marine Vehicles, pp. 238-246. University of Duisburg-Essen, Germany.
- ZHANG, J., LU, J. (2011). Measuring propeller blade width using binocular stereo vision. In: Journal of Marine Science and Application, Vol. 10, pp. 246-251. Springer. ISSN 1993-5048
Go to original source...
- ACKERMANN, S., MENNA, F., SCAMARDELLA, A., TROISI, S. (2008). Digital photogrammetry for high precision 3D measurements in ship building field. In: Proceedings of the 6th CIRP International Conference on ICME - Intelligent Computation in Manufacturing Engineering, Naples, Italy. ISBN 978-88-900948-7-3
- MENNA, F., TROISI, S. (2010). Low cost reverse engineering techniques for 3D modelling of propellers. In: The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol. XXXVIII, Part 5 Commission V Symposium, pp. 452-457, Newcastle upon Tyne, UK.
- HERNANDEZ, A., LEMAIRE, E. (2017). A Smartphone Photogrammetry Method for Digitizing Pros-thetic Socket Interiors. In: Prosthetics and Orthotics International, Vol. 41, No. 2, pp. 210-214. SAGE Publications, California, United States. ISSN 1746-1553
Go to original source...
- ZHANG, C., MAGA, A. M. (2023). An Open-Source Photogrammetry Workflow for Reconstructing 3D Models. In: Integrative Organismal Biology, Vol. 5, No. 1, bad024. Oxford University Press, Oxford, England. ISSN 2517-4843
Go to original source...
- NEBEL, S., BEEGE, M., SCHNEIDER, S., REY, G. D. (2020). A Review of Photogrammetry and Photorealistic 3D Models in Education From a Psychological Perspective. In: Frontier in Education, Vol. 5, No. 144. Frontiers Media SA, Lausanne, Switzerland. ISSN 2504-284X
Go to original source...
- MENNA, F., ACKERMANN, S., SCAMARDELLA, A., TROISI, S. (2009). Digital photogrammetry: a useful tool for shipbuilding applications. In: Proceedings of the 13th Congress of International Maritime Association of Mediterranean IMAM 2009, Istanbul, Turkey, pp. 607-614.
- SEDLAK, J., HRUSECKA, D., CHROMJAKOVA, F., MAJERIK, J. & BARENYI, I. (2021). Analysis of the Wear on Machined Groove Profiles Using Reverse Engineering Technology. In: Manufacturing Technology, Vol. 21, No. 4, pp. 529-38. J. E. Purkyně University in Usti nad Labem, Czech Republic. ISSN 1213-2489
Go to original source...
- FABIAN, M., HUŇADY, R. & KUPEC, F. (2022). Reverse Engineering and Rapid Prototyping in the Process of Developing Prototypes of Automotive Parts. In: Manufacturing Technology, Vol. 22, No. 6, pp. 669-78. J. E. Purkyně University in Usti nad Labem, Czech Republic. ISSN 1213-2489
Go to original source...
- BECHNÝ, V., MATUŠ, M., JOCH, R., DRBÚL, M., HOLUBJÁK, J., CZÁN, A., ŠAJGALÍK, M. & MARKOVIČ, J. (2023). Design of an Injection Mould Utilizing Experimental Measurements and Reverse Engineering. In: Manufacturing Technology, Vol. 23, No. 5, pp. 597-603. J. E. Purkyně University in Usti nad Labem, Czech Republic. ISSN 1213-2489
Go to original source...
- VAN, T.N., LE THANH, T., NAPRSTKOVA, N. (2021). Measuring propeller pitch based on photogrammetry and CAD. In: Manufacturing Technology, Vol. 21, No. 5, pp.706-713. J. E. Purkyně University in Usti nad Labem, Czech Republic. ISSN 1213-2489
Go to original source...
- HERNANDEZ, A., LEMAIRE, E. (2017). A smartphone photogrammetry method for digitizing pros-thetic socket interiors. In: Prosthetics and Orthotics International, Vol. 41, No. 2, pp. 210-214. SAGE Publications, California, United States. ISSN 1746-1553
Go to original source...
- AJJIMAPORN, P., FEIST, D., STRAUB J, KERLIN, S. (2015). Impact of lighting and attire on 3D scan-ner performance. In: Proceedings of the three-dimensional imaging, visualization, and display 2015, 94951E
Go to original source...
- AGISOFT LLC. (2020). Agisoft Metashape user manual professional edition, version 1.8.
- TUONG, N.V. (2018), Manufacturing method of spiral bevel gears based on CAD/CAM and 3-axis Ma-chining center. In: MM Science Journal, Vol. June 2018, pp. 2401-2405. MM Publishing, Czech Republic. ISSN 1803-1269
Go to original source...
- MENDRICKY, R., SOBOTKA, J. (2020). Accuracy comparison of the optical 3D scanner and CT scanner. In: Manufacturing Technology. Vol. 20, No. 6, pp. 791-801. J. E. Purkyně University in Usti nad Labem, Czech Republic. ISSN 1213-2489
Go to original source...
- VAN, T.N., LE THANH, T., VAN, T.N., NAPRSTKOVA, N. (2023). Smartphone-based data Acquisition method for modelling 3D printed arm casts. In: Manufacturing Technology Journal, Vol. 23, No. 2, pp. 260-267. J. E. Purkyně University in Usti nad Labem, Czech Republic. ISSN 1213-2489
Go to original source...
- VAN T.N., NAPRSTKOVA N (2024), Accuracy of photogrammetric models for 3D printed wrist-hand orthoses, In: Manufacturing Technology, Vol. 23, No. 3, pp. 458-464. J. E. Purkyně University in Usti nad Labem, Czech Republic. ISSN 1213-2489
Go to original source...
- FAIZIN, M., PARYANTO, P., CAHYO, N., RUSNALDY, R. (2024). Investigating the accuracy of boat propeller blade components with reverse engineering approach using photogrammetry method. In: Results in Engineering, Vol. 22, June 2024, 102293. ISSN: 2590-1230
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.