Manufacturing Technology 2026, 26(4):408-423 | DOI: 10.21062/mft.2026.043
Model solution for vibrations of mechanical systems – Part I
- 1 Faculty of Mechanical Engineering, J. E. Purkyne University in Usti nad Labem. Pasteurova 3334/7, 400 01 Usti nad Labem. Czech Republic
- 2 High School of Shipping and Technical Crafts, Decin VI, p. o., Delnicka 825/15, Decin VI-Letna, 405 02 Decin, 405 02 Decin VI, Czech Republic
The article deals with the solution of vertical vibrations of mechanical systems (machines). The introduction briefly characterizes the boundary conditions of the proposed solution, while the analytical solution itself is based on Lagrange's equation of the second kind. Its solution for this case is briefly outlined. A simplified spatial model of a material system is proposed, which allows changing the distribution of masses and various kinematic excitations of the resulting system. Relationships for the vertical displacement of individual points of the proposed mechanical system are derived for various variants of kinematic excitation. In the next part of the article, an analytical calculation of the vertical displacements of selected points is performed for an undamped mechanical system with symmetric and asymmetric kinematic excitation. The calculation is performed with a defined mechanical system consisting of a rigid plate with two counterweights that allow the distribution of masses to be changed. The system is mounted on four forced springs (cylindrical) with defined stiffness. Selected results for different arrangements of the mechanical system under different kinematic excitations are presented in the article.
Keywords: Vibration, Mechanical system, Kinematic excitation, Rotation angles
Grants and funding:
Supported by the OPST Project Green Energy Technologies Centre of UJEP, Reg. number CZ.10.02.01/00/24_061/0000462
Received: June 24, 2026; Revised: June 24, 2026; Accepted: October 25, 2026; Prepublished online: November 16, 2026; Published: November 17, 2026 Show citation
References
- SOUKUP, J., VOLEK, J., et al. (2008). Vibrations of mechanical systems - vehicles. Analysis of the influence of asymmetry. (Kmitání mechanických soustav - vozidel. Analýza vlivu nesymetrie), 1st ed., Acta Universitatis UJEP in Ústí n. L, Ústí n. L., pp. 269, ISBN 978-80-7414-020-4
- PUST, L., LADA, M. (1965). Flexible machine storage. (Pružné ukládání strojů), SNTL Praha, 1965, pp. 190
- ZEMAN, V., HLAVAC, Z. (2004). Vibration of mechanical systems. (Kmitání mechanických soustav), ZČU Plzeň, Fakulta aplikovaných věd, Plzeň, 2004
- AMER, M.; WALLASCHEK, J.; SEUME, J.R. (2022). Operational Modal Analysis of an Axial Compressor Rotor and Casing System for the Online Identification of a Digital Twin. Appl. Mech. 2022, No. 3, pp. 244-258. https://doi.org/10.3390/applmech3010017
Go to original source... - AWREJCEWICZ, J. (2008). Mechanika, Wydawnictwa Naukowo-Techniczne, Fundacja Ksiaźka "Naukowo-Techniczna", Warszawa, 2008, p. 580, ISBN 978-83-924382-3-6
- SHEN, C., LU, C. (2024). A Method to Obtain Frequency Response Functions of Operating Mechanical Systems Based on Experimental Modal Analysis and Operational Modal Analysis. Machines 2024, 12, 516. https://doi.org/10.3390/machines12080516
Go to original source... - KASHANI, M., HASHEMI, S.M. (2022) On the Free Vibration and the Buckling Analysis of Laminated Composite Beams Subjected to Axial Force and End Moment: A Dynamic Finite Element Analysis. Appl. Mech. 2022, 3, 210-226. https://doi.org/10.3390/applmech3010015
Go to original source... - NAKANO, Y., KISHI, T., TAKAHARA, H. (2021). Experimental Study on Application of Tuned Mass Dampers for Chatter in Turning of a Thin-Walled Cylinder. Appl. Sci. 2021, 11, 12070. https://doi.org/10.3390/app112412070
Go to original source... - BRAUN, S., EWINS, D., RAO, S. SW. (2002). Encyklopedia of Vibration. New York: Academic Press, New York, 2002
- DE SILVA, CLARENCE W. (ed.) (2005). Vibration and shock handbook. Mechanical engineering series. Boca Raton: Taylor & Francis, 2005. ISBN 0-8493-1580-8.
Go to original source... - MATANIA, O., BACHAR, L., BECHHOEFER, E., BORTMAN, J. (2024). Signal Processing for the Condition-Based Maintenance of Rotating Machines via Vibration Analysis: A Tutorial. Sensors 2024, 24, 454. https://doi.org/10.3390/s24020454
Go to original source... - STEJSKAL, V., OKROUHLÍK, M. (2002). Kmitání s Matlabem. (Vibration with Matlab), ČVUT Praha, 376 str., Praha, 2002, ISBN 80-01-02435-0
- SAPIETOVÁ, A., DEKÝŠ, V., JAKUBOVIČOVÁ, L., NOVÁK, P., SAPIETA, M. (2023). Dynamika riešená v programoch Matlab a Msc Adams. (Dynamics Solved in Matlab and Msc Adams), EDIS - vydavatelstvo UNIZA, pp. 362, Žilina, 2023, ISBN 978-80-554-1956-5
- SHI, L.; SUN, B. (2019). Mathematical modeling and vibration simulation of an orbital sander. Vibroengineering Procedia 2019, 22, pp. 176-181. https://doi.org/10.21595/vp.2018.20466
Go to original source... - FERNANDES, M.H., GARITAONANDIA, I., ALBIZURI, J., HERNÁNDEZ, J.M., BARRENETXEA, D. (2009). Simulation of an active vibration control system in a centerless grinding machine using a reduced updated FE model. International Journal of Machine Tools and Manufacture 2009, 49, no. 3-4, pp. 239-245. ISSN 0890-6955. Dostupné z: https://doi.org/10.1016/j.ijmachtools.2008.11.002.
Go to original source... - LOVSKA, A., GERLICI, J., DIŽO, J., RUKAVISHNIKOV, P. (2026). Study of Strength of Open Wagon with Tank Containers Under Operational Modes. Eng. Proc. 2026, 121, 2. https://doi.org/10.3390/engproc2025121002
Go to original source... - ROJÍČEK, J.; PAŠKA, Z.; FUSEK, M.; CIENCIALA, J.; LIČKOVÁ, D. (2022). Finite Element Simulation of HELICOIL® Inserts. Appl. Sci. 2022, 12, 11337. https://doi.org/10.3390/app122211337
Go to original source... - CERNOHLAVEK, V.; KLIMENDA, F.; HOUSKA, P.; SUSZYŃSKI, M. (2023). Vibration Measurements on a Six-Axis Collaborative Robotic Arm-Part I. Sensors 2023, 23, 1629. ISSN: 1424-8220, https://doi.org/10.3390/s23031629
Go to original source... - PONIKELSKY, J., CERNOHLAVEK, V., STERBA, J., HOUSKA, P. (2023). Research of Robots in Cooperative Mode in Human Body Part Detection. In: Manufacturing Technology. Vol. 23, No. 1 (2023) pp 99-109. ISSN: 1213-2489. DOI: 10.21062/mft.2023.007
Go to original source... - MELLER A, SUSZYŃSKI M, LEGUTKO S, TRĄCZYŃSKI M, MRÓZ A, CERNOHLAVEK V. (2023). Optimizing Shock Absorber Operation for Improved Hot Forging Efficiency. Manufacturing Technology. 2023;23(5):663-669. doi: 10.21062/mft.2023.074.
Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.



ORCID...