Manufacturing Technology 2013, 13(3):345-349 | DOI: 10.21062/ujep/x.2013/a/1213-2489/MT/13/3/345

Evaluation of vibration on technological devices

Petr Lukovics
Brno University of Technology, Faculty of Mechanical Engineering, Czech Republic

Research paper discuss the possibility of vibration detection on production machine and also presents devices and methodology for evaluation of vibration amplitude using non-contact laser interferometer and contact piezoelectric vibration sensors. Experimentally determines the influence of technological conditions on the quality of functional surfaces. Furthermore, paper evaluates the influence of technological conditions during planar grinding on the vibration amplitude of the grinding spindle and presents correlation between grinder vibration amplitude and quality of the product.

Keywords: Vibration, Grinding, Surface quality, Roughness

Published: October 1, 2013  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Lukovics P. Evaluation of vibration on technological devices. Manufacturing Technology. 2013;13(3):345-349. doi: 10.21062/ujep/x.2013/a/1213-2489/MT/13/3/345.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BÍLEK, O., LUKOVICS, I. Model of Dynamics within Highspeed Grinding Process. In DUSE, D.M.; BRINDASU, P.D.; BEJU, L.D. (eds.). MSE 2009: Proceedings of the Manufacturing Science and Education. Sibiu, Romania, June 4-6. Sibiu: Lucian Blaga University of Sibiu, 2009, p. 11-14. ISSN 1843-2522.
    2. HOLEŠOVSKÝ, F., NOVÁK, M., MICHNA, Š. Studium změn broušené povrchové vrstvy při dynamickém zatěžování. Strojírenská technologie. s. 73-76. ISSN 1211-4162.
    3. JURKO, J., LUKOVICS, I. Obrábateľnosť materiálov. 1.vyd, Zlín: UTB, 2008. 144p. ISBN 978-80-7318-736-1.
    4. KUNDRÁK, J. Alternative machining procedures of hardened steels. Manufacturing technology. 2011, vol 11, no. 11., pp. 32-39, ISSN 1213-2489. Go to original source...
    5. LUKOVICS, I., BÍLEK, O. High Speed Grinding Process. Manufacturing Technology, 2008, 8, 12-18. ISSN 1213248-9.
    6. LUKOVICS, I., BÍLEK, O. Precise Grinding. 7th International Tools Conference. Zlín, 3.-4.2.2009. ISBN 978-80-7318-794-1.
    7. MONKA, P., MONKOVA, K., ZAJAC, J. Multi Variant Process Plans. In. DAAAM International Scientific Book 2009, Vienna : DAAAM Int., 2009, ISBN 978-3-901509-69-8. Go to original source...
    8. NOVÁK, M. Možnosti hodnocení kvality obrobených povrchů. Strojírenská technologie. 2010, zvl. vydání, Ústí n. Labem : FVTM UJEP, s. 195-198. ISSN 1211-4162.
    9. NOVÁK, P., MÁDL, J. Effective Evaluation of Measured Dynamic Values of Cutting Forces and Torques. Manufacturing Technology, vol. I, 2001, pp.56-62, ISSN 1213248-9.
    10. PANDA, A., JURKO, J., KURILOVSKÝ, T. Výroba pre automobilový priemysel. In 15th International scientific conference: Quality and reliability of technical systems. 2010. pp. 377-382. ISBN 978-80-552-0390-4.7
    11. KUNDRAK, J., MAMALIS, A. G., GYANI, K., BANA, V. Surface layer microhardness changes with high-speed, The International Journal of Advanced Manufacturing Technology. Volume 53, Issue 1-4 (2011), pp.105-112 DOI: 10.1007/s00170-010-2840-y Go to original source...
    12. LUKOVICS, I., ROKYTA, L. Influence of the Technological Conditions on Quality by Grinding. Strojírenská technologie, 2010, roč. 14, s. 151-154. ISSN 1211-4162
    13. LUKOVICS, I., BÍLEK, O., HOLEMÝ, S., Development of Grinding Wheels for Tools Manufacturing. Manufacturing Technology, 2010, č.10, s.10-16. ISSN 1213-2489 Go to original source...

    Return to the content