Manufacturing Technology 2014, 14(1):79-84 | DOI: 10.21062/ujep/x.2014/a/1213-2489/MT/14/1/79

Computer Design of Robot ABB IRB 140 Transport System from Manufacturing Point of View

Jozef Novak-Marcincin, Miroslav Janak, Dominik Takac
Faculty of Manufacturing Technologies, Technical University of Kosice, Bayerova 1, 08001 Presov, Slovakia

This paper presents the theoretical and practical aspects of industrial robots transport systems problems focused on application possibilities connected with concrete type of robotic device. Introduction of the article presents today possibility of robot transport systems and collect information about basic technical parameters of transport systems, their design and construction. Main part describe industrial robot ABB IRB 140, collect information about technical parameters, its construction, axes, motions and applications used in industrial practice. Practical part of paper is focused on proposal of robot transport system design from manufacturing point of view.

Keywords: industrial robot, transport system, manufacturing technology

Published: March 1, 2014  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Novak-Marcincin J, Janak M, Takac D. Computer Design of Robot ABB IRB 140 Transport System from Manufacturing Point of View. Manufacturing Technology. 2014;14(1):79-84. doi: 10.21062/ujep/x.2014/a/1213-2489/MT/14/1/79.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. ONG, S. K. (2012). Interactive Robot Trajectory Planning and Simulation Using Augmented Reality, Robotics and Computer-Integrated Manufacturing, Vol. 28, No. 2, pp. 227-237, ISSN 0736-5845. Go to original source...
    2. ONG, S. K. (2010). A novel AR-based robot programming and path planning methodology, Robotics and Computer-Integrated Manufacturing, Vol. 26, No. 3, pp. 227-237, ISSN 0736-5845. Go to original source...
    3. NOVAK-MARCINCIN, J., NOVAKOVA-MARCINCINOVA, L. (2013). Advanced techniques for NC programs preparation. Applied Mechanics and Materials, Vol. 389, pp. 726-729, ISSN 1660-9336. Go to original source...
    4. BOROS, T., LAMAR, K. (2012). Six-axis educational robot workcell with integrated vision system, LINDI 2012 - IEEE International Symposium on Logistics and Industrial Informatics, Art. no. 6319495, pp. 239-244. Go to original source...
    5. BILEK, O., SAMEK, D., KNEDLOVA, J. (2013). Offline programming for robotic deburring process of aluminium. Manufacturing Technology, Vol. 13, No. 3, pp. 269-275, ISSN 1213-2489 Go to original source...
    6. ABB (2008). IRBT X004, Data sheet. Available on: http://www.abb.sk/product/seitp327/569910ed39487cb6c12574360040afa9.aspx?productLanguage=sk&country=SK.
    7. ABB (2012). IRB 140, Data sheet. Available on: internete: http://www05.abb.com/global/scot/scot241.nsf/veritydisplay/d7dfcc72e3fd760dc12579c7002ce1e0/$file/PR10031EN%20R14%20LR.pdf.
    8. LAMAR, K., NESZVEDA, J. (2013). Average probability of failure of a periodically operated devices. Acta Polytechnica Hungarica, Vol. 10, No. 8, pp. 153-167, ISSN 1785-8860. Go to original source...
    9. BEDNAROVA, V., LICHY, P., ELBEL, T., LANA, I. (2013). Production and properties of metal foams from non-ferous metals alloys. Manufacturing Technology, Vol. 13, No. 3, pp. 262-265, ISSN 1213-2489. Go to original source...
    10. VOJTKO, I., KOCISKO, M., JANAK, M., FECOVA, V. (2013). The new design of robot arm, SAMI 2013 - IEEE International Symposium on Applied Machine Intelligence and Informatics, Art. no. 6480943, pp. 53-56. Go to original source...
    11. PETRUSKA, P., NOVAK-MARCINCIN, J., DOLIAK, M. (1997). ROANS - intelligent simulation and programming system for robots and automated workcell. Proceedings of the IEEE International Conference on Intelligent Engineering Systems INES, pp. 451-456, ISBN 0-7803-3627-5. Go to original source...
    12. BARNA, J., FECOVA, V., NOVAK-MARCINCIN, J., TOROK, J. (2012). Utilization of Open Source Application in Area of Augmented Reality Assembling Processes. Manufacturing Technology, Vol. 12, No. 12, p. 2-7, ISSN 1213-2489. Go to original source...
    13. NOVAK-MARCINCIN, J., JANAK, M., BARNA, J., TOROK, J., NOVAKOVA-MARCINCINOVA, L., FECOVA, V. (2012). Verification of a Program for the Control of a Robotic Workcell with the Use of AR. International Journal of Advanced Robotics Systems, Vol. 9, Art. No. 54, ISSN 1729-8806. Go to original source...
    14. NOVAK, M., KASUGA, H., OHMORI, H. (2013). Differences at the Surface Roughness by the ELID and Grinding Technology. Manufacturing Technology, Vol. 13, No. 2, pp. 210-215, ISSN 1213-2489. Go to original source...
    15. NOVAK-MARCINCIN, J., DOLIAK, M., HLOCH, S., ERGIC, T. (2010). Application of the Virtual Reality Modelling Language to Computer Aided Robot Control System ROANS. Strojarstvo, Vol. 52, No. 2, pp. 227-232, ISSN 0562-1887.
    16. NOVAK-MARCINCIN, J., BRAZDA, P., JANAK, M., KOCISKO, M. (2011). Application of Virtual Reality Technology in Simulation of Automated Workplaces. Tehnicki Vjesnik, Vol. 18, No. 4, pp. 577-580, ISSN 1330-3651.
    17. NOVAK-MARCINCIN, J., TOROK, J., BARNA, J., NOVAKOVA-MARCINCINOVA, L. (2012). Technology of Perspective Scanning Methods for Realization of 3D Models of Manufacturing Devices. Manufacturing Technology, Vol. 12, No. 13, pp. 186-191, ISSN 1213-2489. Go to original source...
    18. NOVAK-MARCINCIN, J., FECOVA, V., BARNA, J., JANAK, M., NOVAKOVA-MARCINCINOVA, L. (2013). Using of the virtual reality application with the scanning device Kinect for manufacturing processes planning. Manufacturing Technology, Vol. 13, No. 2, 2013, p. 215-219, ISSN 1213-2489. Go to original source...
    19. NOVAK-MARCINCIN, J., JANAK, M., FECOVA, V., NOVAKOVA-MARCINCINOVA, L. (2013). Utilization of Augmented Reality Elements for Visualization of Operational States of Manufacturing Devices. Applied Mechanics and Materials, Vol.. 308, pp. 111-114, ISSN 1662-7482. Go to original source...
    20. NOVAK-MARCINCIN, J., FECOVA, V., NOVAKOVA-MARCINCINOVA, L., TOROK, J., BARNA, J. (2013). Verification of Machine Position in Production Plant with Use of Virtual Reality Technology. Applied Mechanics and Materials, Vol.. 308, pp. 171-174, ISSN 1662-7482. Go to original source...
    21. NOVAK-MARCINCIN, J., BARNA, J., TOROK, J., JANAK, M. (2013). Visual Reconstruction and Optimization of Real Wokplace on the Base of Spatial Digitisation. Applied Mechanics and Materials, Vol.. 308, pp. 175-178, ISSN 1662-7482. Go to original source...
    22. NOVAK-MARCINCIN, J., BARNA, J., TOROK, J. (2014). Precision assembly process with augmented reality technology support. Key Engineering Materials, Vol. 581, pp. 106-111, ISSN 1662-9795. Go to original source...
    23. NOVAK-MARCINCIN, J., TOROK, J., NOVAKOVA-MARCINCINOVA, L. (2014). New possibility of visualization in mechanical engineering. Applied Mechanics and Materials, Vol. 442, pp. 209-215, ISSN 1660-9336. Go to original source...
    24. NOVAK-MARCINCIN, J., NOVAKOVA-MARCINCINOVA, L. (2014). Collision detection application for virtual and augmented reality aided manufacturing system. Applied Mechanics and Materials, Vol. 464, pp. 338-344, ISSN 1660-9336. Go to original source...
    25. NOVAK-MARCINCIN, J., JANAK, M. (2014). Design and realization of robot workplaces with virtual and augmented reality application. Advanced Materials Research, Vol. 853, pp. 613-618, ISSN 1662-8985. Go to original source...

    Return to the content