Manufacturing Technology 2015, 15(4):644-647 | DOI: 10.21062/ujep/x.2015/a/1213-2489/MT/15/4/644

New Composite Materials Based on NiTi

Pavel Novák, Eva Kristianová, Milan Valalik, Clarisse Darme, Pavel Salvetr
University of Chemistry and Technology, Prague, Department of Metals and Corrosion Engineering, Technická 5, 166 28 Prague 6, Czech Republic

NiTi alloy is characterized by many interesting properties assiciated with the shape memory behaviour. Since this material can be superelastic and recover the shape after deformation, it can be considered as potential matrix for composites. In this work, the possibility of preparation of NiTi matrix composites was tested. Two kinds of materials were studied - NiTi matrix composite reinforced by ceramic particles and in-situ composite containing NiTi and hard Ti2Ni phase obtained by reactive sintering of Ni+Ti mixture.

Keywords: NiTi, powder metallurgy, composite

Published: September 1, 2015  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Novák P, Kristianová E, Valalik M, Darme C, Salvetr P. New Composite Materials Based on NiTi. Manufacturing Technology. 2015;15(4):644-647. doi: 10.21062/ujep/x.2015/a/1213-2489/MT/15/4/644.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. VOJTĚCH, D., KUBÁSEK, J., NOVÁK, P. (2013). Corrosion properties of the superelastic shape memory Ni-Ti alloy for medical implants. In: Manufacturing Technology, Vol. 13, No. 3, pp. 409-414. UJEP. Czech Republic. Go to original source...
    2. FARVIZI, M., EBADZADEH, T., VAEZI, M.R., YOON, E.Y., KIM, Y-J., KIM, H.S., SIMCHI, A. (2014). Microstructural characterization of HIP consolidated NiTi-nanoAl2O3 composites. In: Journal of Alloys and Compounds, Vol. 606, pp. 21-26. Go to original source...
    3. HU, L., KOTHALKAR, A., PROUST, G., KARAMAN, I., RADOVIC, M. (2014). Fabrication and characterization of NiTi/Ti3SiC2 and NiTi/Ti2AlC composites. In: Journal of Alloys and Compounds, Vol. 610, pp. 635-644. Elserier. Netherlands. Go to original source...
    4. NOVÁK P., ©KOLÁKOVÁ A., VOJTĚCH V., KNAISLOVÁ A., POKORNÝ P., MORAVEC H., KOPEČEK J., KARLÍK M., KUBATÍK T.F. (2014). Application of Microscopy and X-ray Diffraction in Optimization of the Production of NiTi Alloy by Powder Metallurgy. In: Manufacturing Technology, Vol. 14, pp. 387-392. Go to original source...
    5. NOVÁK, P., MORAVEC, H., SALVETR, P., PRŮ©A, F., DRAHOKOUPIL, J., KOPEČEK, J., KARLÍK, M., KUBATÍK, T.F. (2015). Preparation of nitinol by non-conventional powder metallurgy techniques, In: Materials Science and Technology, DOI: http://dx.doi.org/10.1179/1743284715Y.0000000041 Go to original source...
    6. NOVÁK, P., VODĚROVÁ, M., HENDRYCH, R., KUBATÍK, T., MICHALCOVÁ, A., VOJTĚCH, D. (2013). Preparation of aluminium-based quasicrystals. In: Manufacturing Technology, Vol. 13, No. 3, pp. 390-394. UJEP. Czech Republic. Go to original source...
    7. NOVÁK, P., VOJTĚCH, D., ©ERÁK, J. (2006). Wear and corrosion resistance of a plasma-nitrided PM tool steel alloyed with niobium. In: Surface and Coatings Technology, Vol. 200, pp. 5229 - 5236. Elsevier. Netherlands. Go to original source...

    Return to the content