Manufacturing Technology 2016, 16(5):1100-1102 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1100

Thermochemical Treatment of Non-Ferrous Alloys

Pavel Novák, Pavel Salvetr, Adriana Bernatiková, Dalibor Vojtěch
University of Chemistry and Technology, Prague, Department of Metals and Corrosion Engineering, Technická 5, 166 28 Prague 6, Czech Republic

Even though the thermochemical treatment is thought as a typical domain of ferrous alloys, there exists a series of technically important processes in the case of non-ferrous metals. Thermochemical heat treatment processes can be divided to two main groups to the manufacture of wear resistant layers and the corrosion protection, mainly against the high-temperature corrosion. This paper summarizes current knowledge in this field and describes the realization of the processes and examples of practical applications.

Keywords: thermochemical treatment, titanium, aluminium, nickel

Published: October 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Novák P, Salvetr P, Bernatiková A, Vojtěch D. Thermochemical Treatment of Non-Ferrous Alloys. Manufacturing Technology. 2016;16(5):1100-1102. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1100.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. DOBROCKY, D., KUSMIC, D. (2015). The Effect of Plasma Nitriding Process on the Change of Dynamic Parameters of steel DIN 1654/4. In: Manufacturing Technology, Vol. 15, No. 1, pp. 14-20. UJEP. Czech Republic. Go to original source...
    2. DOBROCKY, D., KUSMIC, D. (2015). The Assessment of Selected Mechanical Properties of Steel after Application of Plasma Nitriding. In: Manufacturing Technology, Vol. 15, No. 3, pp. 307 - 315. UJEP. Czech Republic. Go to original source...
    3. DOAN, V., KUSMIC, D., POSPICHAL, M. (2015) Surface Treatment Technologies for Wear Resistance Increasing of 42CrMo4 Steel, In: Manufacturing Technology, Vol. 15, No. 3, pp. 303 - 307. UJEP. Czech Republic. Go to original source...
    4. PILCH, O., SNAHNICAN, F., HRUBY. V., STUDENY, Z. (2015). The Effect of Plasma Nitriding Parameters on the Thickness of Nitrided Layers. In: Manufacturing Technology, Vol. 15, No. 5, pp. 885 - 889. UJEP. Czech Republic.2015, Vol. 15, No. 5, 885 - 889 Go to original source...
    5. JAHNOVÁ, V., VOJTĚCH, D., NOVÁK, P., NOVÁK, M. (2004). Zvyąování povrchové tvrdosti titanu nitridací. In: Proceedings of Metal 2004, CD, Tanger, Czech Republic.
    6. GREDELJ, S., KUMAR, S., GERSON, A.R., CAVALLARO, G.P. (2006). Radio frequency plasma nitriding of aluminium at higher power levels. In: Thin Solid Films, Vol. 515, pp. 1480-1485. Elsevier, Netherlands. Go to original source...
    7. VOJTĚCH, D., KUBATÍK, T., PAVLÍČKOVÁ, M., MAIXNER, J. (2006). Intermetallic protective coatings on titanium. In: Intermetallics, Vol. 14, pp. 1181-1186. Elsevier, Netherlands. Go to original source...
    8. VOJTĚCH, D., NOVÁK, P., MACHÁČ, P., MOR«ANIKOVÁ, M., JUREK, K. (2008). Protection of titanium by Ti5Si3 silicide layer prepared by combination of vapour phase siliconizing and heat treatment. In: Journal of Alloys and Compounds, Vol. 464, pp. 179-184. Elsevier, Netherlands. Go to original source...

    Return to the content