Manufacturing Technology 2018, 18(2):179-184 | DOI: 10.21062/ujep/74.2018/a/1213-2489/MT/18/2/179
Analysis of Kinematic Features in Non-conventional Piston Device with Wobble Board
- Faculty of Mechanical Engineering, University of ®ilina, 010 26 ®ilina. Slovak Republic
In the case of constructing combustion engines, it is possible to use not only classical crank mechanisms, but also non-conventional mechanisms. Article deals with description of non-conventional piston mechanism with ring, which may be suitable for special applications in the engineering industry. Investigation of kinematic parameters of the machines is important step to know its basic movement behaviour, and from this, it is then possible to create the alternate dynamic model or force analysis. The aim of this analysis is to investigate the movement of several points on a wobble plate. The next section will deal with the analysis of waveforms of the piston stroke depending on connection with a specified point on wobble board.
Keywords: Non-conventional Device, Kinematic Features, Wobble Board
Published: April 1, 2018 Show citation
References
- BARTA, D., SANIGA, J., MRUZEK, M., KENDRA, M. (2013). Design of selected parts of non-conventional stirling engine with fik mechanism. The Online Journal of Science and Technology. - ISSN 2146-7390. - Vol. 3, iss. 2 (2013), online, pp. 129-139.
- DI®O, J., BLATNICKÝ, M., SKOČILASOVÁ, B. (2015). Computational Modelling of the Rail Vehicle Multibody System Including Flexible Bodies. In: Communications - Scientific Letters of the University of Zilina, Vol. 17, No. 3, 31-36. ISSN 1335-4205.
- ISTENIK, R. (2008). Distribution and Non-Conventional Mechanisms of Combustion Engines. ®ilina, 188p. - ISBN 978-80-894-0100-0.
- ISTENIK, R., BARTA, D., MUCHA, W. (2004). Influence of the Wheels on the Automobile Dynamics. In: Communications - Scientific Letters of the University of Zilina, Vol. 6, No. 1, pp. 26-28. - ISSN 1335-4205.
Go to original source... - LING, Q., HE, Y., HE, YUAN, ET AL. (2017). Dynamic response of multibody structure subjected to blast loading. In: European journal of mechanics a-solids, Vol. 64, July - August, pp. 46 - 57, (2017). Go to original source...
- BITTNER, V., et al. (2017). Using the fourier transform in the analysis of vibration load tests of heterogeneous mechanical systems. In: Manufacturing technology: journal for science, research and production. - ISSN 1213-2489. - Vol. 17, No. 6 (2017), pp. 836-841. Go to original source...
- KLIMENDA, F., RYCHLÍKOVÁ, L., HUSÁR, ©., SOUKUP, J. (2017). Dissemination of waves in thin plates. In: Manufacturing technology: journal for science, research and production. - ISSN 1213-2489. - Vol. 17, No. 6 (2017), pp. 863-869. Go to original source...
- SKOČILASOVÁ, B., SKOČILAS, J. (2015). Nusselt number criteria equations in the cross flow over single tube. In: Manufacturing technology: journal for science, research and production. - ISSN 1213-2489. - Vol. 15, No. 6 (2015), pp. 1043-1048. Go to original source...
This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.