Manufacturing Technology 2018, 18(2):239-242 | DOI: 10.21062/ujep/84.2018/a/1213-2489/MT/18/2/239

Effect of The Heat Treatment on The Bioactivity of Nanostructured Surfaces

Vojtěch Hybášek, Jaroslav Fojt, Zdeněk Kačenka, Petra Jarolímová, Eva Průchová
University of Chemistry and Technology Prague, Technicka 5, 166 28 Praha 6, Czech Republic

Titanium and its alloys are widely used materials in implantology due to their high corrosion resistance and biocompatibility. The bioactivity and the osseointegration of these surfaces could be enhanced by several processes. One of them is the formation of nanostructure by the combination of electrochemical and chemical reactions. The nanotubular oxidic structure has positive influence on the precipitation of hydroxyapatite from the body environment and on the cell proliferation. Directly created layer has amorphous character, but it is possible to transform it to crystalline form by heat treatment. This could have another positive influence on bioactivity. The influence of surfaces nanostructuring of commercially pure titanium and experimental beta alloy Ti-39Nb and their subsequent heat treatment on bioactivity will be presented in this work. This has been evaluated by Ca-P based compounds precipitation on the surface during the in vitro exposure in simulated body fluid. It was found that heat treatment has considerable influence on surface bioactivity.

Keywords: beta-titanium, nanotubes, hydroxyapatite, impedance, heat treatment

Published: April 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Hybášek V, Fojt J, Kačenka Z, Jarolímová P, Průchová E. Effect of The Heat Treatment on The Bioactivity of Nanostructured Surfaces. Manufacturing Technology. 2018;18(2):239-242. doi: 10.21062/ujep/84.2018/a/1213-2489/MT/18/2/239.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. FOUSOVA M, VOJTECH D. (2017) Influence of Process Conditions on Additive Manufacture of Ti6Al4V Alloy by SLM Technology. In: Manufacturing Technology, Vol. 17, No. 5, pp. 696-701. J. E. Purkyne University in Usti n. Labem, Czech Republic. Go to original source...
    2. FROST, H.M. (1994). Wolff's Law and bone's structural adaptations to mechanical usage: an overview for clinicians. In: The Angle Orthodontist, Vol, 64, No. 3, pp. 175-188. Edward H. Angle Society of Orthodontists, USA.
    3. BAHRAMINASAB, M., et al. (2012). Aseptic loosening of femoral components - A review of current and future trends in materials used. In: Materials & Design, Vol. 42. pp. 459-470. Elsevier Sci Ltd, England. Go to original source...
    4. BAHRAMINASAB, M., et al. (2013). Aseptic loosening of femoral components - Materials engineering and design considerations. In: Materials & Design, Vol. 44, pp. 155-163. Elsevier Sci Ltd, England. Go to original source...
    5. CHAN, C.-W., et al. (2016). Enhancement of wear and corrosion resistance of beta titanium alloy by laser gas alloying with nitrogen. In: Applied Surface Science, Vol. 367, pp. 80-90. Elsevier Science Bv, Netherlands. Go to original source...
    6. TANAKA, Y., et al. (2008). Characterization of air-formed surface oxide film on Ti-29Nb-13Ta-4.6Zr alloy surface using XPS and AES. In: Corrosion Science, Vol. 50, No.8, p. 2111-2116. Elsevier Sci Ltd, England. Go to original source...
    7. OKAZAKI, Y. and E. Gotoh (2005). Comparison of metal release from various metallic biomaterials in vitro. In: Biomaterials, Vol. 26, pp. 11-21. Elsevier Sci Ltd, England. Go to original source...
    8. MACAK, J.M. and P. SCHMUKI (2006) Anodic growth of self-organized anodic TiO2 nanotubes in viscous electrolytes. In: Electrochimica Acta, Vol. 52, No. 3, pp. 1258-1264. Elsevier Sci Ltd, England. Go to original source...
    9. MACAK, J.M., et al. (2007) Multilayer TiO2-nanotube formation by two-step anodization. In: Electrochemical and Solid State Letters, Vol. 10, No.7, pp. K28-K31. Electrochemical Soc Inc, USA. Go to original source...
    10. FOJT, J., (2012) Ti-6Al-4V alloy surface modification for medical applications. In: Applied Surface Science, Vol. 262, pp. 163-167. Elsevier Science Bv, Netherlands. Go to original source...
    11. MACAK, J.M., et al. (2005). Self-organized nanotubular oxide layers on Ti-6A1-7Nb and Ti-6A1-4V formed by anodization in NH4F solutions. In: Journal of Biomedical Materials Research Part A, Vol. 75A, No. 4, pp. 928-933. Wiley-Blackwell, USA. Go to original source...
    12. FOJT, J., V. HYBASEK, and L. JOSKA (2016) Electrochemical behaviour of the nanostructured surface of Ti-35Nb-2Zr alloy for biomedical applications. In: Materials and Corrosion, Vol. 67, No. 9, pp. 915-920. Wiley-V C H Verlag GmbH, Germany. Go to original source...
    13. FERREIRA, C.P., et al. (2013) Effects of substrate microstructure on the formation of oriented oxide nanotube arrays on Ti and Ti alloys. In: Applied Surface Science, Vol. 285, Part B, pp. 226-234. Elsevier Science Bv, Netherlands. Go to original source...
    14. GHICOV, A., et al. (2006) TiO2-Nb2O5 nanotubes with electrochemically tunable morphologies. In: Angewandte Chemie-International Edition, Vol. 45, No. 42, pp. 6993-6996. Wiley-V C H Verlag GmbH, Germany. Go to original source...
    15. MORAVEC, H., et al. (2016) Cell interaction with modified nanotubes formed on titanium alloy Ti-6Al-4V. In: Materials Science and Engineering: C, Vol. 65, pp. 313-322. Elsevier Science Bv, Netherlands. Go to original source...
    16. STAN, M.S., et al. (2015) Effects of titanium-based nanotube films on osteoblast behavior in vitro. In: J Biomed Mater Res A, Vol. 103 No. 1, pp. 48-56. Go to original source...
    17. FILOVA, E., et al. (2015). The diameter of nanotubes formed on Ti-6Al-4V alloy controls the adhesion and differentiation of Saos-2 cells. In: International Journal of Nanomedicine, pp. 7145. Dove Medical Press Ltd, New Zealand Go to original source...
    18. TAN, A.W., et al. (2012) Review of titania nanotubes: Fabrication and cellular response. In: Ceramics International, Vol. 38, No. 6, pp. 4421-4435. Elsevier Sci Ltd, England. Go to original source...
    19. ALHOSHAN, M.S., et al. (2012). Heat treatment and electrochemical activation of titanium oxide nanotubes: The effect of hydrogen doping on electrochemical behavior. In: Electrochimica Acta, Vol. 62, pp. 390-395. Elsevier Sci Ltd, England. Go to original source...
    20. YU, J. and B. WANG (2010). Effect of calcination temperature on morphology and photoelectrochemical properties of anodized titanium dioxide nanotube arrays. In: Applied Catalysis B: Environmental, Vol. 94 No. 3-4, pp. 295-302. Elsevier Science Bv, Netherlands. Go to original source...
    21. NOVAK, P., SALVETR, P., BERNATIKOVA A., VOJTECH D. (2016). Termochemical Treatment of Non-Ferrous Alloys. In: Manufacturing Technology, Vol. 16 No. 5, pp. 1100-1102. J. E. Purkyne University in Usti n. Labem, Czech Republic.
    22. OH, S.-H., et al. (2005). Growth of nano-scale hydroxyapatite using chemically treated titanium oxide nanotubes. In: Biomaterials, Vol. 26 No. 24, pp. 4938-4943. Elsevier Sci Ltd, England. Go to original source...
    23. KOKUBO, T. and H. TAKADAMA (2006). How useful is SBF in predicting in vivo bone bioactivity? In: Biomaterials, Vol. 27, No. 15, pp. 2907-2915. Elsevier Sci Ltd, England. Go to original source...
    24. POSPISILOVA I., MSALLAMOVA S.,VOJTECH D. (2015). Testing of Zn-1.6Mg Alloy in Physiological Solution In: Manufacturing Technology, Vol. 15, No. 6, pp. 1032-1036. J. E. Purkyne University in Usti n. Labem, Czech Republic. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content