Manufacturing Technology 2018, 18(2):289-294 | DOI: 10.21062/ujep/93.2018/a/1213-2489/MT/18/2/289

Ultrasonic Testing of Diffusion Bonded Joints of AlMg3

Pavel Nachtnebl1, Ladislav Kolařík1, Lucie Forejtová2, Uwe Reisgen4, Wilfried Behr3
1 Department of Manufacturing Technology, CTU in Prague, Czechia
2 ATG s.r.o, Beranových 65, Praha 9, 199 02, Czechia
3 Central Institute for Engineering, Electronics and Analytics, Research centre Jülich, Germany
4 Welding and Joining Institute, RWTH Aachen, Germany

The Diffusion welding was used to join aluminium alloy AlMg3 in order to make ultrasonic testing of diffusion bonded joints and analyse diffusion process. This ultrasonic testing should be used to compare with other non-destructive testing methods which the Institute of Manufacturing Technology of CTU in Prague develop. The paper discusses the ultrasonic testing for the diffusion bonded joints of AlMg3 and magnesium oxide which was created and which had an influence on quality of the diffusion bonded joints. The Alloy AlMg3 was selected because of easy correlation with welding parameters, ultrasonic testing, metallographic examination and preparation of samples for the diffusion welding.

Keywords: diffusion welding, AlMg3, magnesium oxide, ultrasonic testing

Published: April 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Nachtnebl P, Kolařík L, Forejtová L, Reisgen U, Behr W. Ultrasonic Testing of Diffusion Bonded Joints of AlMg3. Manufacturing Technology. 2018;18(2):289-294. doi: 10.21062/ujep/93.2018/a/1213-2489/MT/18/2/289.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. SHIRZADI, Amir A. (1997). Diffusion Bonding Aluminium Alloys and Composites: New Approaches and Modelling. Cambridge, 1997. A thesis submitted for the degree. University of Cambridge. Supervisor: Rob Wallach.
    2. KAZAKOV. N.F. (1976). Diffuzionnajasvarka materialov, Mašinostrojenije, Moskva, 1976
    3. TURŇA, M. (1989). Špeciálnemetódyzvárania, Alfa, Bratislava, 1989
    4. JÁŇA, M., TURŇA, M. KOLAŘÍK, L., KOLAŘÍKOVÁ, M. (2012). Difúzne zváranie kombinovaných kovov, Sborník konference Zvárania 2012, VUZ, 2012
    5. P. NACHTNEBL, L. KOLAŘÍK, M. KOLAŘÍKOVÁ, P. VONDROUŠ (2014). Diffusion welding of structural steel E295, Technological forum 2014, Prague.
    6. KOLAŘÍK, L., P. NACHTNEBL, J. JANOVEC, and M. KOLAŘÍKOVÁ. (2015). Influence of Diffusion Welding Time on Homogenous Steel Joints. Procedia Engineering [online]. 2015, 100, 1678-1685. DOI: 10.1016/j.proeng.2015.01.543. Go to original source...
    7. P. NACHTNEBL, U. REISGEN, G. NATOUR, W. BEHR, L. STEIN, H. GLÜCKLER, L. KOLAŘÍK. (2016). Diffusion welding of homogeneous joints of alloy AlMg3, Technological forum 2016, Prague.
    8. Forschungszentrum Jülich GmbH. Bereich Prüf- und Abnahmetechnik [online]. [cit. 2017-05-05].Availablefrom::http://www.fzjuelich.de/zea/zea1/DE/Ausstattung/PruefUndAbnahmetechnik.html?nn=1012570
    9. DC and AC Electric Power Measurement. [online]. [cit. 2017-05-05]. Available from:http://www.electronicshub.org/dc-and-ac-electric-power-measurement/
    10. GINDT Institute of Nondestructive Testing & Training [online]. [cit. 2017-05-05]. Available from:http://www.gindt.co.in/services.php
    11. BondTest EU Project: Seventh Framework Programme [FP7/2007-2014] under grant agreement no 605288. BondTest [online]. [cit. 2017-05-05]. Available from: http://www.bondtest.eu/
    12. TWI: BondTest - Development of an Ultrasonic Testing Technique to Characterise Diffusion Bonds in Layered Structures [online]. [cit. 2017-05-05]. Available from: http://www.twi-global.com/_resources/assets/attachment/full/0/2130214.pdf
    13. JIANG, Biao, Johan E. CARLSON, Miguel Castaño ARRANZ, Philip LINDBLAD, Johan ÖHMAN. (2015). Ultrasonic Imaging through Thin Reverberating Materials. Physics Procedia. 2015, 70, 380-383. DOI: 10.1016/j.phpro.2015.08.099. ISSN 18753892. Available from: http://linkinghub.elsevier.com/retrieve/pii/S1875389215008408 Go to original source...
    14. TOTKA BAKALOVA, NIKOLAY PETKOV, HRISTO BAHCHEDZHIEV, PETR LOUDA. (2016). Tribology of Titanium-Aluminium Base Nanomultilayer Coatings. Manufacturing Technology. 2016, 2016(16), 5. ISSN 1213-2489. Go to original source...
    15. MAXIM PUCHNIN, OLEKSANDR TRUDONOSHYN, OLENA PRACH, FRANTIŠKA PEŠLOVÁ. (2016). Comparison of ABI Technique and Standard Methods in Measuring Mechanical Properties of Aluminium Alaloys. Manufacturing Technology. 2016, 2016(16), 7. ISSN 1213-2489. Go to original source...
    16. DANA BOLIBRUCHOVÁ, MAREK BRŮNA. (2017). Impact of the Elements Affecting the Negative Iron-Based Phases Morphology in Aluminium Alloys - Summary Results. Manufacturing Technology. 2017, 2017(17), 4. ISSN 1213-2489. Go to original source...
    17. TOMASZ LIPIŃSKI. (2017). Analysis of Mechanical Properties of AlSi9Mg Alloy with Al, Ti and B Additions. Manufacturing Technology. 2017, 2017(17), 5. ISSN 1213-2489. Go to original source...
    18. IVA NOVAKOVA, JAROMIR MORAVEC, PAVEL KEJZLAR. (2017). Metallurgy of the Aluminium Alloys for High-Pressure Die Casting. Manufacturing Technology. 2017, 2017(17), 7. ISSN 1213-2489. Go to original source...
    19. MILAN UHRÍČIK, PETER PALČEK, MÁRIA CHALUPOVÁ, TATIANA ORŠULOVÁ. (2017). The Structure of the Aluminium Alloy and Its Influence on the Fatigue Properties. Manufacturing Technology. 2017, 2017(17), 6. ISSN 1213-2489. Go to original source...
    20. PETRA KVASNOVÁ, DANIEL NOVÁK, VIKTOR NOVÁK (2017). A Laser Welding of Aluminium Alloys. Manufacturing Technology. 2017, 2017(17), 6. ISSN 1213-2489. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content