Manufacturing Technology 2018, 18(2):299-302 | DOI: 10.21062/ujep/95.2018/a/1213-2489/MT/18/2/299

High-temperature Behaviour of New Fe-Al-Si Alloy Produced by Powder Metallurgy

Pavel Novák, Kateřina Nová, Tomáš Vanka, Filip Průša
Department of Metals and Corrosion Engineering, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague, Czech Republic

This work describes properties of newly developed Fe-Al-Si alloy for high-temperature applications. This alloy is a material composed of FeAl, FeSi a Fe3Al2Si3 intermetallic compounds, which was prepared by powder metallurgy using mechanical alloying and spark plasma sintering. The oxidation resistance at the temperatures of 800 and 1000 °C was described, as well as the mechanical properties up to 700 °C. During oxidation, the alloy covers by aluminium oxide layer, which protects it against further oxidation. Concerning the mechanical properties, the yield strength and ultimate compressive strength increase in the temperature interval of 400 - 500 °C.

Keywords: iron aluminide; iron silicide; powder metallurgy; high temperature

Published: April 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Novák P, Nová K, Vanka T, Průša F. High-temperature Behaviour of New Fe-Al-Si Alloy Produced by Powder Metallurgy. Manufacturing Technology. 2018;18(2):299-302. doi: 10.21062/ujep/95.2018/a/1213-2489/MT/18/2/299.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. LEE, D., SANTELLA, M.L., ANDERSON, I.M., PHARR G.M. (2005) Thermal aging effects on the microstructure and short-term oxidation behavior of a cast Ni3Al alloy. In: Intermetallics, Vol. 13, pp. 187-196. Go to original source...
    2. MORRIS, D.G., MUNOZ-MORRIS M.A. (2007) Development of creep-resistant iron aluminides. Materials Science and Engineering A462, pp. 45-52. Go to original source...
    3. MORRIS, D.G., MUNOZ-MORRIS, M.A. (2010) A re-examination of the pinning mechanisms responsible for the stress anomaly in FeAl intermetallics, Intermetallics, Vol. 18, pp. 1279-1284. Go to original source...
    4. MASSALSKI, T.B. (1990) Binary Alloy Phase Diagrams, ASM Int.: Materials Park.
    5. VAN DYCK, S., DELAEY, L., FROYEN, L., BUEKENHOUT, L. (1995) Reactive powder metallurgy of Ni3Si-based alloys. In: Intermetallics, Vol. 3, 309-314. Go to original source...
    6. NOVÁK, P., ŠKOLÁKOVÁ, A., VOJTĚCH, V., KNAISLOVÁ, A., POKORNÝ, P., MORAVEC, H., KOPEČEK, J., KARLÍK, M., KUBATÍK, T.F. (2014) Application of Microscopy and X-ray Diffraction in Optimization of the Production of NiTi Alloy by Powder Metallurgy, In: Manufacturing Technology, Vol. 14, pp. 387-392. Go to original source...
    7. VALALIK, M., NOVÁK, P., KUBATÍK, T.F., VOJTĚCH, D. (2015) Unconventional Method of Preparation Intermetallic Phases Fe-Al by Mechanical Alloying in Comparison to Reactive Sintering, In: Manufacturing Technology, Vol. 15, pp. 105-109. Go to original source...
    8. SCHAEFER, H.E., FRENNER, K., WURSCHUM R. (1999) High-temperature atomic defect properties and diffusion processes in intermetallic compounds, In: Intermetallics, Vol. 7, pp. 277-287. Go to original source...
    9. CASTELLANO, J., CHAUDHARI, A., AND BROMHAM, J. (2013) Adaptive Temperature Control for Diesel Particulate Filter Regeneration, SAE Technical Paper 2013-01-0517, doi:10.4271/2013-01-0517. Go to original source...
    10. NOVÁK, P., ZELINKOVÁ, M., ŠERÁK, J., MICHALCOVÁ, A., NOVÁK, M., VOJTĚCH, D. (2011) Oxidation resistance of SHS Fe-Al-Si alloys at 800 °C in air, In: Intermetallics, Vol. 19, pp. 1306-1312. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content