Manufacturing Technology 2018, 18(3):406-410 | DOI: 10.21062/ujep/113.2018/a/1213-2489/MT/18/3/406

Design of Triaxial Production Device

Jakub Kaščak, Monika Telišková, Jozef Török, Marek Kočiško, Martin Pollák
Faculty of Manufacturing technologies wit a seat in Presov, Technical University of Kosice, 080 01 Prešov, Slovak republic

Like most new technologies, 3D printing has long been a domain of narrowly specialized fields. However, the potential of this technology is enormous and thus it has been gradually finding its application in ever-newer sectors. This paper focuses on the structure and overall implementation of a triaxle manufacturing device inspired by an existing 3D printer design based on the modular RepRap concept. The result is a functional triaxle manufacturing device capable of performing 3D printing and laser cutting or laser engraving.

Keywords: Manufacturing equipment, Laser engraving, FFF technology, ZMORPH 2.0 SX

Published: June 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Kaščak J, Telišková M, Török J, Kočiško M, Pollák M. Design of Triaxial Production Device. Manufacturing Technology. 2018;18(3):406-410. doi: 10.21062/ujep/113.2018/a/1213-2489/MT/18/3/406.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. TELIŠKOVÁ, M., KOČIŠKO, M., CMOREJ T., TÖRÖK, J., BARNA J. (2015). Application possibilities of slicers for 3D printing technology. In: Intech 2015, pp. 96-99.
    2. HANZL P., ZETKOVÁ I., MACH J. (2017) Optimalization of the pressure Porous Sample and its Manufacturability by selective laser melting. In: Manufacturing Technology, Vol.17, No. 1, pp.34-38, Czech republic. Go to original source...
    3. VASILKO, K., MURČINKOVÁ, Z. (2017). The Proposal How to Make the Basic Machining Technologies - Turning, Milling, Planing - More Productive, In: Manufacturing Technology, Vol. 17, No. 2, pp. 261-267. Czech Republic. Go to original source...
    4. KUNDRAK, J., FELHO, C. (2016). 3D Roughness Parameters of Surfaces Face Milled by Special Tools, In: Manufacturing Technology, Vol. 16, No. 3, pp. 532-538. Czech Republic. Go to original source...
    5. TELIŠKOVÁ, M., TÖRÖK, J., CMOREJ, T., KOČIŠKO, M., PETRUS, J. (2017). Adjusment of RepRap type printer workbench. In. ICIEA 2017, pp. 15-20. IEEE, Danvers. Go to original source...
    6. NOVÁK-MARCINČIN, J., BARNA, J., JANÁK, M., NOVÁKOVÁ-MARCINČINOVÁ, Ľ., TÖRÖK, J. (2012). Visualization of intelligent assembling process by augmented reality tools application. In: 4th IEEE International symposium on Logistics and Industrial Informatics. pp. 33-36. Go to original source...
    7. DAŇA, M., ZETKOVÁ, I., HANZL, P. (2016). Printing of Thin Walls using DMLS. In: Manufacturing Technology, Vol. 16, No. 5, pp. 883-889. Go to original source...
    8. FOUSOVÁ, M., VOJTĚCH, D., KUBÁSEK, J., DVORSKÝ, D., MACHOVÁ, M., 3D Printing as an Alternative to Casting, Forming and Machining Technologies, In: Manufacturing Technology, ISSN 1213-2489, Paper number: M201514 Go to original source...
    9. ZAJAC, J., HATALA M., DUPLÁK, J., DUPLÁKOVÁ, D., STERANKA J. (2017). Experimental High Speed Milling of the Selected Thin-Walled Component, In: TEM Journal. Vol. 6, pp. 678-682. ISSN 2217-8309.
    10. DOBRÁNSKY, J., BARON, P., KOČIŠKO, M., TELIŠKOVÁ, M. (2015). Monitoring diagnostic indicators during operation of a print machine, In: Advances in Science and Technology, Vol. 9, No. 28, pp. 34 - 39. Soc Polish Mechanical Engineers & Technicians. Poland Go to original source...
    11. KHADERI, S: N., DESHPANDE, V. S., FLECK, N. A. (2014). International Journal of Solids and Structures, Department of Engineering, Cambridge University, Cambridge, International Journal of Solids and Structures 51 (2014) 3866 - 3877. Go to original source...
    12. BROŽEK, M. (2005). Cutting conditions optimization when turning overlays. Journal of Materials Processing Technology. 168, 3, 488-495 Go to original source...
    13. NAPRSTKOVA, N., KALINCOVA, D. (2015). Influence of additional chemical components on machining properties of selected aluminium - silicon alloy. In: 14th International Scientific conference: Engineering for rural development. Jelgava, Latvia University of Agriculture, pp.766-771. ISSN: 1691-3043

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content