Manufacturing Technology 2018, 18(3):510-517 | DOI: 10.21062/ujep/130.2018/a/1213-2489/MT/18/3/510

Structural Analysis of a Main Construction Assemblies of the New Wagon Prototype Type Zans

Pavol ©»astniak1, Lukáą Smetanka1, Marián Moravčík2
1 Faculty of Mechanical Engineering, University of ®ilina, 010 26 ®ilina. Slovak Republic
2 Tatravagónka Inc., ©tefánikova 887/53, 05801 Poprad. Slovak Republic

The paper is part of the publication series, which describe the most significant and innovative research and development design solutions and computational procedures as part of European structural funds project. The object of this article is strength conditions assessment of a new structure of railway tank wagon. For validation of the new construction assemblies, there has been created a substitute simulation model. Results of calculations and prototype tests prove, that new structure of the construction satisfies strength assessments according to valid requirements and standards.

Keywords: tank wagon, structural analysis, computer simulation

Published: June 1, 2018  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
©»astniak P, Smetanka L, Moravčík M. Structural Analysis of a Main Construction Assemblies of the New Wagon Prototype Type Zans. Manufacturing Technology. 2018;18(3):510-517. doi: 10.21062/ujep/130.2018/a/1213-2489/MT/18/3/510.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. DI®O, J., STEI©UNAS, S., BLATNICKÝ, M. (2017). Simulation analysis of the effects of a rail vehicle running with wheel flat. In: Manufacturing technology. - ISSN 1213-2489. - Vol. 16, No. 5 (2016), pp. 889-896. Go to original source...
    2. DI®O, J. (2016). Analysis of a goods wagon running on a railway test track. In: Manufacturing Technology. - ISSN 1213-2489. - Vol. 16, No. 4, 2016, pp. 667-672. Go to original source...
    3. Commission Decision 2006/861/ES (Annex J) of 28 July 2006 and Commission decision of 23 January 2009 amending Decisions 2006/861/ES and 2006/920/EC (2009/107/ES).
    4. EN 12 663-2 (2011): Railway applications. Structural requirements of railway vehicle bodies. Part 2: Freight wagons. European Committee for Standardization (2011).
    5. EN 10 025-3 (2005): Hot rolled products of structural steels. Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels.
    6. ERRI B12/RP17, No. 8: Programme of Stresses to be carried out on Wagons with Steel Underframe and Body Structure. European Rail Research Institute (1996).
    7. FOMIN, O. V. (2014). Modern requirements to carrying systems of railway general-purpose gondola cars. In: Metallurgical & Mining Industry. - ISSN 2076-0507. - Issue 5 (2014), pp. 40-44.
    8. GERLICI, J., et al. (2016). Experimental rigs for wheel/rail contact research. In: Manufacturing technology. - ISSN 1213-2489. - Vol. 16, No. 5 (2016), pp. 909-916. Go to original source...
    9. GERLICI, J., LACK, T. (2014). Rail vehicles brake components test bench utilisation. In: Aplied Mechanics and Materials. - ISSN 1660-9336. - Vol. 486 (2014), pp. 379-386. Go to original source...
    10. HANDRIK, M., SÁGA, M., PECHÁČ, P., KOPAS, P. (2015). Analysis of force conditions of the hot forming machine in rolling-out of bearing rings. In: Manufacturing technology. - ISSN 1213-2489. - Vol. 15, No. 5 (2016), pp. 821-825. Go to original source...
    11. HAUSER, V., et. al. (2017). Proposal of a steering mechanism for tram bogie with three axle boxes. In: Procedia Engineering. - ISSN 1877-7058. - Vol. 192 (2017), pp. 289-294. Go to original source...
    12. SOUKUP, J., SVOBODA, M. (2014). Vertical oscillation of a simplified model a mechanical system. In: Journal of Applied Nonlinear Dynamics. - ISSN 2164-6457. - Vol. 3, No. 4 (2014), pp. 347-358. Go to original source...
    13. SOUKUP, J., SKOČILAS, J., SKOČILASOVÁ, B. (2017). Assessment of railway wagon suspension characteristics. In: Mechanical Systems and Signal Processing. - ISSN 0888-3270. - Vol 89 (2017), pp. 67-77. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content