Manufacturing Technology 2019, 19(2):350-356 | DOI: 10.21062/ujep/295.2019/a/1213-2489/MT/19/2/350

Vibration Diagnostics of CNC Machining Center Spindle

Jozef Žarnovský1, Ivan Kováč1, Rastislav Mikuš1, Jiři Fries2, Matúš Mošať1
1 Faculty of engineering, Slovak University of Agriculture in Nitra, Tr. A. Hlinku 2, 949 76 Nitra
2 Faculty of Mechanical Engineering, Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava-Poruba

The principle of vibrodiagnostics lies in the appropriate measuring and analysis of mechanical vibrations of machinery and constructions in industrial and laboratory environment.
The aim of this paper is to perform diagnostic measurements on the most essential parts (spindles) of machinery devices Semico VCM 1000. Measurements were carried out by means of portable vibrodiagnostic measuring device Adash A4900 vibrio M. Vibrodiagnostic itself was realized as a walk-monitoring of machinery state according to corresponding technical standard ISO 10816-3:2009, and of limit values, which took place at regular intervals in the selected organization.

Keywords: Vibrations; diagnostics; spindle; device; speed
Grants and funding:

Projects VEGA no. 1/0718/17 Study about the effect of technological parameters of the surface coating in agricultural and forestry techniques for qualitative parameters, safety and environmental acceptability.

Published: April 1, 2019  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Žarnovský J, Kováč I, Mikuš R, Fries J, Mošať M. Vibration Diagnostics of CNC Machining Center Spindle. Manufacturing Technology. 2019;19(2):350-356. doi: 10.21062/ujep/295.2019/a/1213-2489/MT/19/2/350.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BLATA, J., ŠEDĚNKA, D., KAŠIAR, L., VOLNA, P. (2017). Examining the condition of the ball and the ball track on the heavy machine ZP6600. In: Diagnostyka. Varšava: Polish Society of Technical Diagnostics, 2017, 18(3), pp. 85-91. ISSN 1641-6414.
    2. BLATA, J. (2010). Metody technické diagnostiky. 1 ed. Ostrava Vysoká škola báňská - Technická univerzita v Ostrave, 2010. 27 pp. ISBN 978-80-248-2735-3
    3. MONI, V., BLATA, J., CYMERYS, D., RIPEL, J. (2014). Practical application of the new MMM method in non-destructive testing. SGEM 2014: 14th international multidisciplinary scientific geoconference: GeoConference on Ecology, Economics, Education and Legislation. Volume III, Environmental economics, 2014, Albena, Bulgaria. STEF92 Technology Ltd., 2014, 14(3), pp. 451-456. ISSN 1314-2704.
    4. MOŠAŤ M. (2017). Diagnostika a analýza vibrácií strojných zariadení. Diplomová práca. Slovenská poľnohospodárska univerzita v Nitre, 2017.
    5. PANDA, A., PRISLUPČÁK, M., JURKO, J., PANDOVÁ, I., MRKVICA, I., LUSCINSKI, S. (2016). The Impact of Vibration on the Technological Head. In: Manufacturing technology, 2016, J. E. Purkyne University in Usti nad Labem, Vol. 16, No. 3 ISSN 1213-2489. Go to original source...
    6. PEŤKOVÁ, V. (2010). Teória a aplikácia vybraných metód technickej diagnostiky. TUKE 2010, 234 s. ISBN 978-80-553-0483-0
    7. ŠEDĚNKA, D., BLATA, J., KAŠIAR, L., HEISIG, L., ŽÁRSKÝ, V. (2017). Deployment of technical diagnostics during commissioning of small pumped storage hydropower plant. In: SGEM 2017: Proceedings of the 17th International Multidisciplinary Scientific GeoConference: 2017, Albena, Bulgaria. Volume 17. Issue 54. Sofia: STEF92 Technology Ltd., 2017. pp. 175-182. ISBN 978-619-7408-11-9.
    8. STN ISO 10816-3: (2010). Mechanické kmitanie. Hodnotenie kmitania strojov meraním na nerotujúcich častiach. Časť 3: Priemyselné stroje s menovitým výkonom nad 15kW s menovitými otáčkami od 120 min-1 do 15 000 min-1 pri meraní v mieste trvalého uloženia.
    9. ŽARNOVSKÝ, J., KOVÁČ, I., KROČKO, V., HEGEDUŠ, P. (2015). Vibrodiagnostics in use of monitoring the technical condition of cars. In: DIAGO 2015. Ostrava: Vysoká škola báňská - Technická univerzita. (2015), pp. 348-354. ISSN 1210-311X.
    10. ZASADZIEŃ, M. (2012). An analysis of reliability indexes of the key machinery in a selected production enterprise. In: DIAGO 2016. Technická diagnostika strojů a výrobních zařízení. Ostrava 1. Vysoká škola báňská - Technická univerzita, ISSN 1210-311X 2012. p. 56.
    11. ZASADZIEŃ M. (2013). An analysis of the failure frequency of machines in an enterprise characterised by a changeable production level. Scientific Journals Maritime University of Szczecin, 34, 2013. ISSN 1733-8670, pp. 103-107.
    12. ZHUN WANG. (2018). Research on the Design of a Mill-turn Center. In: Manufacturing technology, 2018, J. E. Purkyne University in Usti nad Labem, 2018 Vol. 18, No. 1, ISSN 1213-24891 Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content