Manufacturing Technology 2019, 19(3):439-445 | DOI: 10.21062/ujep/310.2019/a/1213-2489/MT/19/3/439

The Application of PFMEA for Roller Bearings Production

Lucie Krejci1, Vladimira Schindlerova1, Michal Bucko1, Ivo Hlavaty1, Milos Mician2
1 Faculty of Mechanical Engineering, VSB - Technical University of Ostrava. 17. listopadu 2172/15, 708 00 Ostrava-Poruba. Czech Republic
2 Faculty of Mechanical Engineering, University of Zilina. Univerzitna 8215/1, 010 26 Zilina. Slovakia

An important trend today is the continual improvement of product quality with the objective of increased customer satisfaction, but also leading to more effective cost reduction management. Effective quality management in a company also enables increasing production productivity thanks to the increasing amount of top-quality products made and the consequent minimalization of repairs of non-conforming workpieces. This contribution deals with one of the important tools for ensuring quality in the production process using the FMEA (Failure Mode and Effect Analysis) method used in the production of roller bearings for the automobile industry.

Keywords: PFMEA, The analyses of defects and their consequences, Bearings, Automobile industry, Quality

Published: June 1, 2019  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Krejci L, Schindlerova V, Bucko M, Hlavaty I, Mician M. The Application of PFMEA for Roller Bearings Production. Manufacturing Technology. 2019;19(3):439-445. doi: 10.21062/ujep/310.2019/a/1213-2489/MT/19/3/439.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open full article

    References

    1. BUCKO, M. (2017). Application of a Procedural FMEA for the Production of Bearings: Master Thesis. Ostrava: V©B - Technical University of Ostrava. Faculty of Mechanical Engineering. Department of Mechanical Technology, 2017, 69 p. Thesis head: Schindlerová, V.
    2. PANTAZOPOULOS, G., TSINOPOULOS, G. (2005). Process Failure Modes and Effects Analysis (PFMEA): A Structured Approach for Quality Improvement. In: The Metal Forming Industry, Vol. 5, 2005, pp. 5 - 10. ISSN 15477029. DOI: 10.1361/15477020522933. Go to original source...
    3. KREJCI, L., SCHINDLEROVA, V., BUCKO, M., HLAVATY, I. (2018). Application of a Process FMEA for the Welding. In: Metal 2018. Conference proceedings: reviewed version: 27th International Conference on Metallurgy and Materials: May 23rd-25th 2018. Ostrava: Tanger, 2018, pp. 1145-1150. ISBN 978-808729484-0.
    4. LIJESH, K., P., MUZAKKIR, S., M., HIRANI, H. (2016). Failure Mode and Effect Analysis of Passive Magnetic Bering. In: Engineering Failure Analysis, Vol. 62, 2016, pp. 1 - 20. ISSN 13506307. Go to original source...
    5. REHMAN, Z., KIFOR, V., C. (2016). An Ontology to Support Semantic Management of FMEA Knowledge. In: International Journal of Computers Communications & Control, Vol. 11, 2016, pp. 507 - 521. ISSN 1841-9836. Go to original source...
    6. KONAR, R., MICIAN, M., HLAVATY, I. Defect Detection in Pipelines During Operation Using Magnetic Flux Leakage and Phased Array Ultrasonic Method. In: Manufacturing Technology, Vol. 14, 2014. ISSN 1213-2489. Go to original source...
    7. HLAVATY, I., KOZAK, J., KREJCI, L. (2016). Study of the Weld Deposit Properties Contained Tungsten Carbides in the Iron Matrix. In: Metal 2016. Brno: 2016, pp. 1056 - 1060. ISBN 978-80-87294-67-3.
    8. PIATKOWSKI, J., KAMINSKI, P. (2017). Risk Assessment of Defect Occurrences in Engine Piston Castings by FMEA Method. Foundry Commission of the Polish Academy of Sciences. Vol. 17, 2017, pp. 107 - 110. ISBN 2299-2944 Go to original source...
    9. LEHOCKA, D., HLAVATY, I., HLOCH, S. (2016). Rationalization of Material Flow in Production of Semitrailer Frame for Automotive Industry. In: Tehnicki Vjesnik-Technical Gazette, Vol. 23, 2016, No. 4, pp. 1215 - 1220. ISSN 1330-3651 (Print), ISSN 1848-6339 (Online). Go to original source...
    10. HLAVATY, I., KOZAK, J., KREJCI, L., SAMARDZIC, I., TUOMINEN, J. (2017). The Effect of Tungsten Carbide Particles Content in a Weld Deposit on its Abrasion Resistance. In: Tehnicki Vjesnik-Technical Gazette, Vol. 24, 2017, No. 5, pp. 1345 - 1349. ISSN 1330-3651 (Print), ISSN 1848-6339 (Online). Go to original source...
    11. ALDRIDGE, J., R., TAYLOR, J., DALE, B., G. (1991). The Application of Failure Mode and Effects Analysis of an Automotive Components Manufacturer, In: International Journal Quality Reliability Management, Vol. 8, 1991, pp. 44 - 56. ISSN 0265-671X. Go to original source...
    12. BAGHERY, M., YOUSEFI, S., REZAEE, J., M. (2016). Risk Measurement and Prioritization of Auto Parts Manufacturing Processes Based on Process Failure Analysis, Interval Data Envelopment Analysis and Grey Relational Analysis. In: Springer Science+Business Media New York 2016. DOI 10.1007/s 10845-016-1214-1.
    13. SCHINDLEROVA, V., SAJDLEROVA, I. (2017). Influence Tool Wear in Material Flow. In: Advances in Science and Technology-research Journal, 2017, year 11, issue 1, pp. 161 - 165.
    14. FRIES, J., HAPLA, T. (2018). Influence Affecting the Lifetime of Belt Conveyor's Drive Drums. In: Tehnicki Vjesnik, Osijek. Vol. 25, 2018, pp. 7 - 14. ISSN 1330 3651. WOS: 000433290300002.
    15. HRUBY, J., SCHINDLEROVA, V., RENTKA, J. (2015). Degradation Processes in the Contact Layers of Forming Tools. In: Manufacturing Technology, Vol. 15, 2015, No. 5, pp. 836 - 842. ISSN 1213-2489. Go to original source...
    16. BOHACIK, M., MICIAN, M., KONAR, R., HLAVATY, I. (2017). Ultrasonic Testing of Butt Weld Joint by TOFD Technique. In: Manufacturing Technology, Vol. 17, 2017, No. 6, pp. 842 - 847. ISSN 1213-2489. Go to original source...

    This is an open access article distributed under the terms of the Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0), which permits non-comercial use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.


    Return to the content