Manufacturing Technology 2014, 14(1):111-116 | DOI: 10.21062/ujep/x.2014/a/1213-2489/MT/14/1/111

New Experimental Dependence of Machining

Karol Vasilko
Faculty of Production Technologies of Technical University in Košice with the seat in Prešov

During the application of recent relationships between cutting conditions and results of machining there occur unevenesses, which can lead to incorrect choice of cutting conditions in concrete conditions of machining of engineering parts. Equations used in practice and on the base of wide experimental analysis to optimise their shape are being analysed in the paper. It concerns the evaluation of chip compression, machined surface microgeometry and cutting tools durability.

Keywords: machining, tool durability, cutting conditions, machined surface quality

Published: March 1, 2014  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Vasilko K. New Experimental Dependence of Machining. Manufacturing Technology. 2014;14(1):111-116. doi: 10.21062/ujep/x.2014/a/1213-2489/MT/14/1/111.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. BÉKÉS, J. (1981): Inžinierska technológia obrábania kovov. Bratislava: ALFA, pp. 398
    2. BOBROV, V.F., et all. (1967): Razvitije nauki o rezanii metallov. Moskva: Mašinostrojenije, pp. 414
    3. BUDA, J., BÉKÉS, J. (1967): Teoretické základy obrábania kovov. Bratislava: ALFA, pp. 698
    4. BUDA, J., SOUČEK, J., VASILKO, K. (1988): Teória obrábania. Bratislava: ALFA, pp. 392
    5. DLOUHÝ, M., HOUDEK, J., KOLOC, J. (1967): Slinuté karbidy pro obrábění. Praha: SNTL, pp. 313
    6. DMOCHOVSKI, J. (1978): Podstavy obróbki skrawaniem. Warszawa, pp. 586
    7. GAZDA, J. (2004): Teorie obrábění. Průvodce tvorbou třísky. Liberec: TU, pp. 112, ISBN 80-7083-789-6
    8. GENSKÝ, R. (1966): Metal Cutting Operations. Leipzig: Edition Leipzig, pp. 191
    9. HOLEŠOVSKÝ, F., NÁPRSTKOVÁ, N., NOVÁK, M. (2012): GISC for grinding process optimalization. Manufacturing Technology, Vol. 12, Nr. 12, pp. 22-26 Go to original source...
    10. GRZESIK, W. (2010): Podstawy skawania materialow metalowych. Warszawa: Wydawnictwa Naukowo-Techniczne, pp. 526, ISBN 978-83-204-3668-6
    11. KUNDRÁK, J. (2011): Alternative machnining procedures of hardened steels. In Manufacturing Technology, No. 11, pp. 32-36 Go to original source...
    12. LOLADZE, T. N. (1952): Stružkoobrazovanije pri rezanii metallov. Moskva, Mašgiz
    13. MÁDL, J., RAZEK, V., KOUTNÝ, V., KAFKA, J. (2013): Surface Integrity in Notches. In Manufacturing Technology, No. 2, pp. 188-193 Go to original source...
    14. MAMALIS, A, G., KUNDRÁK, J., HORVÁTH, M. (2002): Wear and Tool Life of CBN Cutting Tools. In Manufacturing Technology, pp. 475-479 Go to original source...
    15. MRKVICA, I., et al. (2012): Cutting ceramic by turning of nickel alloy Inconel. In Manufacturing Technology, vol. 13, pp. 178-186 Go to original source...
    16. PŘIKRYL, Z., MUSÍLKOVÁ, R. (1982): Teorie obrábění. Praha: SNTL, pp. 235
    17. ŠEBELOVÁ, E., CHLADIL, J. (2013): Tool Wear and Machinability of WOOD-based Materials during Machining Process. Manufacturing Technology, Vol. 13, No. 2, pp. 321-325 Go to original source...
    18. TAYLOR, F, W. (1906): On the art of cutting metals. Transaction of the ASME, 28, pp. 31-279, 281-350
    19. VASILKO, K., MACUROVÁ, A. (2006): Identifikácia rovnice T = f (vc) pre spekaný karbid. Technologické inžinierstvo, III, pp. 8-11
    20. VASILKO, K., MÁDL, J. (2012): Teorie obrábění. Ustí n. Labem: UJEP, pp. 526, ISBN 978-80-7414-460-8
    21. ZOREV, N.N. (1962): Issledovanije elementov mechaniki processa rezanija. Moskva: Mašgiz

    Return to the content