Manufacturing Technology 2016, 16(5):1068-1073 | DOI: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1068

Tool Wear Evaluation of Selected Inserts after Turning by Electron Microscopy

Nataša Náprstková1, Jaromír Cais1, Pavel Kraus1, Tuong Nguyen Van2
1 Faculty of Production Technology and Management, J. E. Purkyne University in Usti nad Labem. Pasteurova 3334/7, 400 01 Usti nad Labem. Czech Republic
2 Faculty of Mechanical Engineering, Nha Trang University, 02 Nguyen Dinh Chieu St., Nha Trang City, Vietnam

Using of cutting inserts is currently a normal part of the manufacturing process. The article deals with the tool wear evaluation of selected inserts for turning by electron microscopy. Use of electron microscopy helps on closer analysis of machining consequences forthese plates, because the microscope images captured with electronmicroscope have a greater depth of sharpness and can display examined object with greater plasticity. It is yet another way to explore objects and extends the possibilities for obtaining large quantities of information. These analyzes were realized in other experiments performed at the Faculty of Production Technology and Management of Jan Evangelisty Purkyně University in Usti nad Labem. As a experimental material the hardened steel class 16 343 according to CSN 41 0002 has been machining.

Keywords: cutting insert, tool wear, SEM

Published: October 1, 2016  Show citation

ACS AIP APA ASA Harvard Chicago IEEE ISO690 MLA NLM Turabian Vancouver
Náprstková N, Cais J, Kraus P, Van TN. Tool Wear Evaluation of Selected Inserts after Turning by Electron Microscopy. Manufacturing Technology. 2016;16(5):1068-1073. doi: 10.21062/ujep/x.2016/a/1213-2489/MT/16/5/1068.
Share...
Download citation
  • BibTeX (.bib)
  • Bookends (.ris)
  • EasyBib (.ris)
  • EndNote (.enw)
  • EndNote 8 (.xml)
  • ISI WoS (.isi)
  • Medlars (.medlars)
  • Mendeley (.ris)
  • MODS (.xml)
  • Papers (.ris)
  • RefWorks (.txt)
  • RefManager (.ris)
  • RIS (.ris)
  • MS Word (.xml)
  • Zotero (.ris)
    • Open article abstract

    References

    1. TAVODOVA, M. Moznosti inovacii vyucby strojarskych technologii. In: Proceedings Zvysovani efektivnosti vzdelavacieho procesu prostrednictvom inovacnych prostriedkov, pp. 81-85. TU vo Zvolene, Zvolen, Slovakia.
    2. WEISS, V., SVOBODOVA, J. (2015). The Use of Colour Metallography and EDS for Identification of Chemical Heterogeneity of Selected Aluminium Alloys Copper and Zinc Alloyed. In: Manufacturing Technology, Vol. 15, No. 6, pp. 1048-1053. Czech Republic Go to original source...
    3. PETRU, J., ZLAMAL, T., MRKVICA, I., CEP, R. (2014). The Effect of Thermal Shocks on Wear of Exchangeable Sintered Carbide Inserts during the Cutting Process. In: Manufacturing Technology, Vol. 14, No. 4, pp. 590-596. Czech Republic Go to original source...
    4. HUMÁR. A. (2008) Materialy pro rezne nastroje. MM Publishing, s.r.o., Prague, Czech Republic
    5. FOREJT, M., PÍŠKA, M. (2006) Teorie obrábění, tváření a nástroje. 1. vyd., Akademické nakladatelství CERM, s.r.o. Brno
    6. CZAJKOWSKA, A., KOSSAKOWSKI, P., WCIŚLIK, W., STASIAK-BETLEJEWSKA, R. (2013). Application of Electron Scanning Microscope in the Analysis of the Structure of Casting NonConformities Aimed at Optimization of Technological Process Parameters. In: Manufacturing Technology, Vol. 13, No. 2, pp. 164-169. Czech Republic Go to original source...
    7. KORDIK, M., STRUHARNANSKY, J., MARTIKAN, A., STANCEKOVA, D., KUSMIERCZAK, S., MARTINCEK, J. (2016). Inserts Coating Influence on Residual Stress of Turned Outer Bearings. In: Manufacturing Technology, Vol. 16, No. 1, pp. 132-136. Czech Republic Go to original source...
    8. KUSMIERCZAK, S. (2011). The Usage of Confocal Laser Microscope by Solving Students Projects, In: proceedings of International Miltidisciplinary Conference, 2011, Nyíregyháza, Hungary, pp.149-152
    9. SNAHNICAN, F. (2015). Deposition of Aluminium Oxide (Al2O3) Coatings on Aluminium Substrate Using Anodizing Processes. In: Manufacturing Technology, Vol 15, No 3, pp. 423-428. Czech Republic Go to original source...
    10. MICHNA, S., KUSMIERCZAK, S. (2012). Praktická metalografie. 245 pp., UJEP, Usti nad Labem, Czech Republic.
    11. CAIS, J. (2015). Elektronova mikroskopie. Metalografie, Praha, CZ.1.07/2.3.00/45.00 29, ISBN 978-80-86302-67-6 [online], 2015 [cit. 14. 5. 2016]. Available from <http://www.csvs.cz/projekty/2014_veda_pro_zivot/data/11_KA3_Jaromir_Cais_2_Elektronova_%20mikroskopie_a_%20EDS_%20analyza_metodicka_prirucka.pdf>
    12. SVOBODOVA, J. (2014). SEM and EDS Analysis Used in Evaluation of Chemical Pre-treatment Based on Nanotechnology. In: Manufacturing Technology, Vol.14, No.3, pp. 461-467. Czech Republic Go to original source...
    13. PETRU, J., SCHIFFNER, J., ZLAMAL, T., SADILEK, M., STANCEKOVA, D. (2015). Investigations of Cutting Tool Wear While Machining Inconel 718. In: Manufacturing Technology, Vol 15, No 3, pp. 396-403. Czech Republic. Go to original source...
    14. VALASEK, P. MÜLLER, M. (2014). Picture Analysis of Failure Areas of Particle Composites. In: Manufacturing Technology Vol 14, No 3, pp. 474-478. Czech Republic
    15. WEISS, V. (2012). Hodnoceni vlivu teploty a doby homogenizačniho žihani slitiny AlCu4MgMnz hlediska mikrostruktury, obrazove analyzy a metody EDX. In: Strojirenska technologie, Vol. 17, No. 5,6, p. 348-355. Czech Republic.

    Return to the content